OPTOCORE V3R-INTERCOM Range
4 I/O Channel Clear-Com / RTS Interface for OPTOCORE and SANE
V3R-INTERCOM
£0.00 Price excludes VAT
Product lists can be submitted to HHB for a packaged quotation
V3R-FX-INTERCOM for Clear-Com/RTS was developed to enable direct interfacing between the Optocore open transmission and Clear-Com/RTS Matrix platforms allowing for a flexible audio based intercom transport solution. It is now possible to take advantage of all Optocore system features and benefits when communicating through an Eclipse Matrix intercom system. Based on the well known V3R-FX series architecture, with 1U height, the device is equipped with standard RJ45 interfaces, making cabling simple and cost-efficient. V3R-FX-INTERCOM offers not only intercom interfacing, but can be used also as analog audio Line-In and Line-Out device.
Optocore’s intercom device is seamlessly integrated into the OPTOCORE® OPTICAL DIGITAL NETWORK SYSTEM. Intercom messages and control data from Clear-Com/RTS user panel or matrix are sent transparently through the optical network. Each single intercom channel can be routed to every device in the network by the OPTOCORE CONTROL software.
KEYFACTS:
- 4 x 4-wire intercom ports
- Integration with Clear-Com, RTS intercom
- Matrix or Panel pinout
- 32-bit transparent transport and routing
- 2 x fibre SFP ports for redundant Optocore ring
- 2 x SANE ports for MADI Cat5, X6R/V3R/Y3R-TP or LAN connectivity
- 4 x RS485/422
- 2 x LAN
- Word Clock I/O
- Dual redundant PSU
Analog Line Input Impedance 10 kΩ
Maximum input level +18 dBu
SNR 115 dB (A-weighted)
THD+N @ -1dBFS ≥ 100 dB
Maximum input level +18 dBu
SNR 115 dB (A-weighted)
THD+N @ -1dBFS ≥ 98 dB
– IC422 EIA / TIA – 422
– IC485 EIA / TIA – 485
Audio TIA – 568A/B, Optocore 200 Mbit/s
LAN TIA – 568A/B, IEEE – 802.3 10/100 Mbit/s
Data channels Digital control data 4
Data rate Up to 10 Mbps
Impedance Termination 330 Ω
Source ≤ 10 Ω
Data rate Depending on used sample rate 44,1 / 48 / 88,2 / 96 / 176,4 / 192 kHz
Impedance Output 75 Ω
Input 1k / 75 Ω software switch
Connection Duplex LC
Protocol Optocore
Transmission Full duplex
Data rate 2 x 2 Gbps
Optical wave guide cable lengths Multimode fibre 50 µm ≤ 700 m
Monomode fibre 9 µm ≤ 70 km (on request)
Data rate 44.1 kHz – 192 kHz
Type Switch-mode, universal input
Mains voltage 100…240VAC, 50/60Hz, 25VA-typ, 32VA-peak
RS232 / USB / Ethernet Control Interface to PC
W x H x D 483 x 44 x 200mm 19.0 x 1.73 x 7.87 inch
Weight 2.7 kg 6.0 lbs